Getting (Linux) ALSA midi support and MIDI networking working with Hatari ========================================================================= If you don't have a real MIDI sequencer, you can use the MIDI synthesizer of your sound card (if available) or use a software synthetizer. For (Debian) package names and links to software referenced in this text, see end of the text. Most of the distros should have in their repositories packages at least for some of them though. Contents: - Quick start - Using a soundcard with built-in MIDI synthesis capability - Making MIDI soft-synthetizer to work with ALSA - Using FluidSynth instead of Timidity - Other software synthetizers - Making it all to work with Hatari - Forwarding MIDI over network - Linux & Atari MIDI related software - Additional documentation Quick start ----------- *If* Hatari is built with PortMidi, getting MIDI output from Hatari is simple. Install a MIDI software synthetizer and virtual MIDI keyboard (on Debian/Ubuntu): sudo apt install qsynth vkeybd Then start them: qsynth & vkeybd & (Hatari scans for the ALSA MIDI devices only at start, so the relevant MIDI output and input devices need to be there before starting Hatari.) Start Hatari, and in the "Devices" option screen, select "Enable MIDI emulation". Then for the input option, select "Virtual Keyboard", and for the "output" option, select "Synth input port". That's all! Rest of this document is about lower level MIDI (raw device) access without PortMidi, Linux MIDI usage in general, and notes of some useful Open Source MIDI software available on Linux. Using a soundcard with built-in MIDI synthesis capability --------------------------------------------------------- If your soundcard is capable of playing MIDI sound (i.e. you can play a .mid file with the "aplaymidi" command using the appropriate port), you can use this synthesis device for Hatari, too. However, you still might have to install and connect a virtual midi device, so that Hatari can access it through a /dev/snd/midiC*D* device file (see instructions below). Please note that you might also have to load instrument patches into your sound card first, for example with the program "sfxload" for AWE64 based sound cards, or with the program "sbiload" for OPL3 based sound cards. Making MIDI soft-synthetizer to work with ALSA ----------------------------------------------- Make Timidity into an ALSA output device with: timidity -Os -iA (-Os: output=alsa, -iA: interface=alsa) To make it use less CPU and be more responsive, use: timidity -Os -iA -B2,8 -EFreverb=0 -EFchorus=0 (-B2,8: set small buffers, -EF=0: disable given effect) Make vkeybd (virtual midi keyboard app) into an ALSA input device with: vkeybd Or use the newer & nicer looking "Virtual MIDI Piano Keyboard": vmpk View the resulting (software) ALSA input and output devices: aconnect -i -o Then connect the vkeybd output port to the timidity input port with: aconnect (Or use e.g. 'aconnectgui' GUI to do it.) => Virtual midi keyboard can now be used to test the sound synthesis. You can also test how well midi files are played. Check which ALSA port Timidity provides: aplaymidi -l And use that port for playing a midi file: aplaymidi -p test.mid ('pmidi' could also be used, and takes same args.) Remember that you need to re-connect the (virtual) device ports each time you restart program adding that port. Using FluidSynth instead of Timidity ------------------------------------ Instead of Timidity, you also use other soft-synthetizers, like FluidSynth: fluidsynth --audio-driver=alsa --midi-driver=alsa_seq soundfont.sf2 You could play a bit with other options to get more performance, sound volume etc: --reverb=no --chorus=no -o synth.polyphony=16 --gain=0.6 And if you don't like the FluidSynth shell, use: --no-shell --server Qsynth provides a GUI for above: qsynth Other software synthetizers --------------------------- Of the other soft-synthetizers, I like also Horgand organ emulator as it has pretty good organ sound, but it needs Jack connection kit (+ e.g. qjackctl) for sound to work properly (not have sound underruns). Making it all to work with Hatari --------------------------------- Hatari requires midi hardware devices to work, it doesn't support ALSA directly without PortMidi. To get the software synth ALSA devices to appear as HW midi devices, run following as *root*: modprobe snd-virmidi [midi_devs=] When you list your ALSA output devices with: aconnect -o You should see in addition to the soft-synth also virtual hardware devices (default device count is 4). Then connect (with 'aconnect' or one of the GUIs) the first virtual HW port to the same soft-synth port where you connected the virtual midi keyboard. Check which number was assigned by ALSA to the new virtual midi card: cat /proc/asound/cards And give to Hatari the corresponding ALSA midi device. In my case VirMidi was Card 1 and as the port used above was first one, I give Hatari the following midi device: hatari --midi-out /dev/snd/midiC1D0 If you use Fluid Synth (or its Qsynth GUI), you can connect that device to synthetizer for example with: aconnect "Virtual Raw MIDI 1-0" "FLUID Synth" (For the virtual midi keyboard, give same device with --midi-in option.) Note: In obsolete Linux distros, SDL_mixer may take exclusive access to the PCM (sound) device, but as the soft synthetizer is already connected to it, one may need to use '--sound off' option to get MIDI sound working. In current distros this should not be a problem (thanks to Pulseaudio etc). Forwarding MIDI over network ---------------------------- If you direct the MIDI data to stdout, you can use just ssh to forward the MIDI output over network: hatari --midi-in "" --midi-out /dev/stdout --log /dev/stderr |\ ssh user@remote.site "cat>/dev/snd/midiC1D0" (Note that logging is re-directed to stderr so that it doesn't mess the MIDI output to standard output and --midi-in is set empty in case you don't have MIDI input device locally.) MIDI-networking two Hatari emulators can be most easily done with socat. MIDI networking over normal TCP/IP network: @remote.site: socat -b1 PTY,rawer,link=/tmp/midi1 TCP4-LISTEN:33333 & hatari --midi-in /tmp/midi1 --midi-out /tmp/midi1 & @local.site: socat -b1 PTY,rawer,link=/tmp/midi2 TCP4:remote.site:33333 & hatari --midi-in /tmp/midi2 --midi-out /tmp/midi2 & Buffer size (-b) is set to one just in case (by default socat buffer size is 8K, but all the MIDI communication is done byte at the time). You may need to open a hole into your firewall for the given port (here 33333). Usually there's a hole for the www-traffic in firewalls, but the port for that (80) is below 1000, so if you use "www" as the port, most likely you need to run "socat" as root. To test this with a single machine, use "localhost" as the "remote.site". Local MIDI network: socat -b1 PTY,rawer,link=/tmp/midi1 PTY,rawer,link=/tmp/midi2 & hatari --midi-in /tmp/midi1 --midi-out /tmp/midi1 & hatari --midi-in /tmp/midi2 --midi-out /tmp/midi2 & If you don't have "socat" installed, 'hatari-local-midi-ring.sh' script shows how to join several (local) Hatari emulators into a MIDI ring using FIFOs. Note: (virtual) MIDI devices cannot be used for networking because those do not support passing of arbitrary data. Linux & Atari MIDI related Software ----------------------------------- In Debian, the tools mentioned above come from following packages: - alsa-utils (aconnect, aplaymidi) - alsa-tools (sbiload) - awesfx (sfxload) - pmidi - vkeybd - vmpk - aconnectgui - qsynth - fluidsynth - fluid-soundfont-* (soundfonts) - timidity - horgand - qjackctl - socat See http://packages.debian.org/ for more details on them. Below are upstream links to some of these tools. Vkeybd: http://alsa.opensrc.org/Vkeybd Virtual MIDI Piano Keyboard (vmpk): http://vmpk.sourceforge.net/ Patch (ALSA connecting) utilities: http://alsa.opensrc.org/AlsaMidiPatchbays FluidSynth: http://www.iiwu.org/fluidsynth/ Horgand: https://sourceforge.net/projects/horgand.berlios/ Soundfonts: http://alsa.opensrc.org/SoundFontHandling List of some soft-synthetizers: http://alsa.opensrc.org/SoftSynth Kaconnect: http://alsamodular.sourceforge.net/ QjackCtl: http://qjackctl.sourceforge.net/ socat: http://www.dest-unreach.org/socat/ As to Atari MIDI programs, here's an incomplete list of games supporting MIDI music: http://www.atari-forum.com/viewtopic.php?f=3&t=21473&start=25#p195632 MidiMaze supports up to 16 players over MIDI network: http://en.wikipedia.org/wiki/MIDI_Maze Additional documentation ------------------------ ALSA midi overview: http://alsa.opensrc.org/AlsaMidiOverview How to set up soundcards with hardware MIDI synthesis capability (AWE & OPL3): https://help.ubuntu.com/community/Midi/HardwareSynthesisSetup Virtual midi hardware setup: http://www.tldp.org/HOWTO/MIDI-HOWTO-10.html Timidity Howto: http://lau.linuxaudio.org/TiMidity-howto.html Midi with ALSA (old): http://www.linuxfocus.org/English/September2002/article259.shtml Midi on Linux: http://www.linuxjournal.com/article/7773 MIDI, Musical Instrument Digital Interface protocol: http://en.wikipedia.org/wiki/Midi